What should a lock quote include?
What a Pakenham 3810 locksmith quote should spell out before you approve the work.
Describe your jobA useful lock quotation describes the work well enough for the customer to understand what will change at the property. It should connect the proposed components and labour to identifiable entrances, rather than rely only on a broad phrase such as lock upgrade.
This guide explains the scope questions to ask before accepting a locksmith proposal. It does not set prices or decide which product suits a particular door. The independent business must assess the installation, explain its own terms and identify any work outside the quotation.
Name each entrance in the quote
Use the same ordinary names used in the enquiry: front door, rear entrance or garage side door. If several doors look similar, identify them clearly enough that the customer and contractor are referring to the same opening.
A proposal should distinguish included entrances from those not assessed. A quote for one cylinder should not be interpreted as a review of every access point on the property.
This entrance list also supports handover. The customer can check completed work against the agreed items without relying on memory about which door was discussed during the visit.
Describe the intended outcome
State whether the job restores operation, changes physical keys, replaces visible hardware or introduces electronic access. More than one outcome can be included, but each should be recognisable.
For example, rekeying may cancel an older key arrangement while retaining suitable hardware. Repairing a latch may restore closing without changing who has a working key. Those are different results even when they concern the same door.
The quotation should not imply that an optional appearance change is necessary to solve an unrelated fault unless the provider explains the connection.
Identify the proposed components
Ask which parts will be retained and which will change. A cylinder, handle, latch and complete mechanism are not interchangeable descriptions. Product or specification information should be sufficient to identify what is proposed.
Where the final item depends on assessment, the quote should say what remains uncertain. An allowance or preliminary proposal should not be mistaken for a confirmed product selection.
If matching a finish matters, record that expectation and any limitation the business has identified. A photograph or a general colour name may not establish an exact match to existing equipment.
Define the assessment stage
Some work can be quoted after inspection; other requests begin with a separate diagnostic visit. Ask what that first stage covers and what information it will establish.
Confirm whether an assessment charge applies and whether any subsequent work is included. A customer should not discover that a quoted visit covers only diagnosis after assuming it included repair.
If the provider cannot establish the cause or compatibility during the initial attendance, ask what further step is required. The quotation should make uncertainty visible rather than disguise it as a guaranteed repair outcome.
Separate attendance from the actual work
Attendance, travel, diagnosis, entry and fitting can be different charge categories. Ask the business to explain its own charging basis and which parts are included in the quoted scope.
If the situation involves after-hours work or another visit, clarify that before accepting. A preferred time in the enquiry is not proof that a particular attendance arrangement or charge has been agreed.
This website does not publish a standard amount for these items. The purpose is to make the provider’s terms understandable, not to imply that every business or job is priced the same way.
Specify the key arrangement
For key changes, identify which entrances will operate together and which remain separate. State whether existing keys are to remain usable or whether an older arrangement is intended to cease.
Record the quantity of keys supplied and any applicable copying process explained by the provider. Do not place key identifiers or other sensitive security details in documents that will be widely circulated.
The keyed-alike guide helps distinguish access groups, while rekeying enquiries covers the information needed for a change using suitable existing cylinders.
Clarify door preparation
Replacement hardware may need different holes, recesses or fixing arrangements. Ask whether the proposed item fits the existing preparation and what alterations are included.
If the supporting material is damaged, identify who repairs it. Fitting a new lock does not automatically restore a weakened door edge or frame. That work may need another provider before final adjustment.
The quote should also state what happens to redundant marks or openings. A functioning installation can leave decorative work outstanding when painting or filling is excluded.
Identify surrounding adjustment work
Door alignment can affect latch operation. If adjustment is part of the recommendation, describe it sufficiently to distinguish it from a cylinder change alone.
A proposal may include a limited adjustment while excluding broader hinge, frame or structural work. The business should explain those boundaries. An unresolved surrounding issue should not be implied to be fixed by replacing a visible component.
The lock repair page gives useful observations for the initial assessment. Include known symptoms in the quote discussion so the contractor can relate its recommendation to the actual fault.
Record electronic work separately
An electronic device can involve hardware fitting, account administration, user setup and associated equipment. Identify which of these the business accepts and what remains the customer’s or another provider’s responsibility.
The quotation should describe the proposed model or specification, required supporting equipment and the intended handover. Do not include live passwords or access codes in the quote itself.
Confirm relevant authorisation for the actual electronic security activity. The smart-lock guide explains the planning issues that differ from a purely mechanical fitting.
Use a scope review table
| Quote heading | Question to answer |
|---|---|
| Entrances | Which doors are included? |
| Purpose | What fault or access objective is addressed? |
| Assessment | What has been inspected and what remains uncertain? |
| Materials | Which components are retained, supplied or replaced? |
| Preparation | What door work is included before fitting? |
| Keys or permissions | What changes and what stays the same? |
| Other work | Which related tasks are excluded? |
| Attendance | Is another visit expected? |
| Variation | How will additional work be approved? |
| Completion | What operation and documentation will be handed over? |
A table cannot replace a technical specification where one is required. It helps the customer see whether the proposal covers the decisions already discussed.
State who supplies equipment
If the contractor supplies the hardware, ask what specification you are approving. If you supply it, confirm whether the business has assessed its suitability and is willing to fit it under its terms.
Clarify responsibility for final dimensions and missing components. A product may be new but incompatible with the installed door. The quote should explain the process if assessment shows it cannot be used.
Avoid purchasing or altering equipment in anticipation of an unconfirmed fitting arrangement. The appropriate preparation should follow the provider’s accepted scope.
Make exclusions readable
Common associated tasks can include carpentry, painting, glazing, powered-door work or broader electronic configuration. Do not assume they accompany a lock quotation merely because they are near the same entrance.
An exclusion should identify a boundary clearly. If another trade must complete work first, the proposal should state the dependency so scheduling remains realistic.
Exclusions are useful when they prevent a misunderstanding. They should not conceal work known to be necessary without explaining how the customer can arrange the appropriate next step.
Agree how variations are handled
Inspection or fitting may reveal a condition that changes the work. Ask how the business will explain the finding and obtain approval before undertaking additional tasks.
A variation should identify the new work, why it is proposed and its effect on the agreed terms. Keep it with the original quotation. Verbal discussions can be clarified in a written record before proceeding.
Attendance at the property should not be treated as permission for an undefined upgrade. The customer should understand which tasks have actually been authorised.
Distinguish estimated timing from confirmed arrangements
A business may discuss a preferred date before it has identified hardware or completed an assessment. Ask which arrangements are confirmed and which depend on material supply or other work.
If a return visit is needed, identify who arranges it and what must happen first. A first attendance does not automatically establish a completion date.
The website cannot guarantee a contractor’s schedule. Accept scheduling commitments only from the business responsible for the work, with the scope and dependencies understood.
Define handover and completion
The quotation should make clear what the provider will demonstrate and document. This can include normal door operation, new keys and relevant product information.
If a temporary arrangement or excluded repair remains, it should be identified at handover. The customer should not confuse an assessed concern with completed work.
For electronic equipment, clarify who will administer the device and what supported functions are included in setup. A lock that operates mechanically is not proof that every requested electronic feature has been configured.
Keep the paperwork usable
Retain the accepted quotation, variations and service record together. Use entrance names that remain understandable after the work rather than references only the installer recognises.
Store security-sensitive details separately from ordinary paperwork. The documentation should identify the product and scope without unnecessarily exposing live credentials or private access arrangements.
If a later issue occurs, the record can help establish what was supplied and what outcome was agreed. It is more useful than a generic invoice that cannot be connected to a particular entrance.
Compare two proposals fairly
Give providers the same description of the doors and desired outcome. If one has assessed the property and another has only seen a short message, recognise the difference in certainty.
Compare materials, preparation, keys and exclusions before comparing totals. A quote that includes door repair and decoration describes different work from one limited to a cylinder.
Ask for clarification where a recommendation differs. The aim is to understand the reason, not to force every provider to propose identical equipment regardless of its assessment.
Example: one entrance, several distinct tasks
Consider a customer with a stiff key, a loose handle and a wish to stop older keys working. A useful quote would explain the diagnosis, the repair or replacement proposed and the separate keying outcome.
If the door also needs carpentry, that should be identified as another item or exclusion. New hardware alone should not be described as completing work it does not address.
This is a planning example, not a claim that a particular repair is suitable or that this website has carried out such a job.
Quote questions
Is a product name enough to define replacement?
Usually it leaves important questions unanswered. Ask which components, preparation and finishing are included for the particular entrance.
Should the quote guarantee that no other fault exists?
No realistic scope can be inferred that way. The provider should identify what it assessed and any limits or further investigation needed.
Can the quote change after inspection?
A revised proposal may be needed if new information changes the scope. The important point is that the reason and additional work are explained before approval.
Does a referral include a free site visit?
Do not assume that. Ask the independent business about its attendance and assessment terms before accepting the arrangement.
Questions about completed work
Contact the business that performed the service with the accepted quote and records. The referral website does not become the contractor.
Request a defined proposal
Use the enquiry form to describe the entrance, observed fault and intended result. The provider-selection checklist helps organise the questions to ask before accepting attendance.
Yes Right Pty Ltd operates this referral service and may receive a fee from the independent business. That business prepares its own quotation and agrees directly with the customer. Sending details does not confirm a price, appointment or completed scope.